Cleaning a newly built floor is not an easy task, especially when there are stains like cement, dust, paint marks, and construction debris. To help you quickly clean the floor without wasting too much time, this article will guide you through the most effective cleaning methods for a newly built floor.
Preparation Steps Before Cleaning the Floor
Before you begin cleaning, you need to prepare all the necessary tools and materials:
- Broom or dust mop
- High-power vacuum cleaner
- Clean mop or cloth
- Specialized floor cleaning solution for tiles or stone
- Dry mop or floor dryer
- Protective gloves and a dust mask
1. Sweep the Dust and Debris from the Floor
The first step in cleaning a newly built floor is to sweep away dust and small debris left over from the construction process. You can use a broom or a vacuum cleaner to remove the dust thoroughly. Make sure that the entire floor surface is dust-free to avoid any remaining dirt when mopping.
2. Clean Stubborn Cement Stains
Cement is one of the toughest stains that often appear on newly built floors. To remove cement stains, you can use a specialized cement remover solution. Be cautious not to use strong chemicals as they can damage the surface of tiles or stone. Instead, use a mild cleaner, apply it to the stain, let it sit for 10-15 minutes, then wipe it off with a damp cloth.
3. Use a Cleaner to Remove Paint Stains
Paint stains are another common problem that can occur during construction. To clean paint, you can use a mild cleaning solution or turpentine (if the paint has dried). Use a soft cloth to avoid scratching the floor surface. Be sure to clean in small sections to ensure thoroughness.
4. Mop the Floor with Warm Water
After removing stubborn stains, the next step is to mop the floor with a damp mop. Use warm water mixed with a small amount of floor cleaner suitable for the type of floor you have. Mop evenly across the entire floor to remove any remaining dust and oil. Be careful not to wet the floor too much, as excessive moisture can cause damage to certain types of tiles or wooden floors.
5. Deodorize and Dry the Floor
After mopping, the final step is to dry the floor. You can use a floor dryer or dry mop to speed up the drying process. This will help prevent any moisture from lingering on the floor, reducing the risk of mold or damage.
Important Tips When Cleaning a Newly Built Floor
- Check the floor material: Before using any cleaning solutions, make sure the cleaning method is suitable for the type of floor to avoid damage.
- Be cautious with chemicals: Some cleaning chemicals can be harmful to your health if not used properly. Always use protective gear such as gloves and masks when cleaning the floor.
- Avoid leaving water on the floor: Leaving water on the floor for too long can cause it to become damp and prone to damage.
Conclusion
By following these steps, you can quickly have a clean and perfect newly built home. However, if you don't have the time or prefer not to handle this task yourself, feel free to contact Phuong Gia Foundation for professional cleaning services for newly built homes. Hotline: 0948952024 - 0824 255 585. Let us help you clean your home quickly and effectively!
